SimplyPats User Forum

Hello to the SP Team.

Just noticed that if I select or deselect the tick box under the print section to use or not use a custom report in my print sequence this seems to be applied to all. So if I want to print out only say one custom report and the remaining as normal/conventional reports, it seems that I am not able to do this. Am I correct, and if so would there be a possible option to select both custom and standard reports under the print sequence?
Or have I just lost the plot and this option is available?

Steve

_________________
City and Guilds 2377 Qualified PAT Testing Engineer
Domestic Electrician(NICEIC)
Always looking for new customers based in Cornwall
All in accordance with The IEE CofP
www.handselectrical.co.uk

Hi Steve



Yes you are correct, on a Print Sequence the custom reports are automatically applied. If there are some that you dont want to use, you could remove them temporarily from the Reports folder within the SimplyPats directory.

However I will have a look at adding a tick box within the Edit Print Sequence screen so that you can select to use (or not) a custom report if they exist.

Regards, Richard.

Hi Richard

Thanks for you super quick response

There is alway one

Ps Hope you and your team have a smashing Christmas, and not literally

Steve

_________________
City and Guilds 2377 Qualified PAT Testing Engineer
Domestic Electrician(NICEIC)
Always looking for new customers based in Cornwall
All in accordance with The IEE CofP
www.handselectrical.co.uk