Metrotest MPAT60

[richard]

We are due to take delivery this week of a Metrohm MPAT60 and will be adding download support for this tester in our utility (free to SimplyPats Version 5 users). The utility gives support for some of the older PAT Test machines no longer in production such as the Seaward 1000 series .

The Metrotest MPAT60 Download should be available in the utility within the next week or so.

Richard

[richard]

Having received our MPAT 60, We have now added support for the Metrotest MPAT60 and MPAT40 Pat Testers in our download utility.

Please contact us if you would like to be able to download from either the MPAT60 or MPAT40 Pat testers into SimplyPats Version 5.

These testers are limited by today's standards in terms of what extra appliance information they can store, the utility however allows you to set Site, Location, PAT Serial Number and Retest Period at time of download.

Richard

[jacquifogg]

Hi Richard

We've recently aquired an MPAT 60 Pat Tester and have had it calibrated. Do you have access to a user manual or know where I can get one? Also, we had a lot of bother getting it calibrated. Do you know a calibration company near to Wimborne, Dorset that can carry out calibration when it's due again next year. Thanks Jacqui

[richard]

Hi Jackie - Thanks for your post.

I have just gone through our collection of our PAT testers and dusted off the MPAT 60. Unbelievably there is a manual for it! - If you send your postal address in an email, we will photocopy the MPAT 60 manual and send you a copy.

Are you using simplypats to download your MPAT60?

Regarding calibration, there is a calibration company in plymouth called Relay Engineering (Calibration Divison)

Relay Engineering Limited (Calibration Division) 01752 256249 Fax 01752 256249 Contact is Don Kennedy

According to a big PAT testing company locally they provide excellent service. Whether they are familiar with the MPAT60 im unsure.

Regards, Richard.

[admin]

If you are looking to download a User Manual for the Metrotest MPAT 40 or 60, please click on the following link.

Forum Account Required

viewtopic.php?f=51&t=318