SimplyPats User Forum

SimplyPats Portable Appliance Testing Software
It is currently Wed Apr 26, 2017 3:15 am

All times are UTC [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Fri Mar 09, 2012 8:53 am 
Offline

Joined: Thu Feb 16, 2012 7:42 pm
Posts: 7
Hi,

I am making up my own adaptor for 400V 3-phase appliance testing which will have a B1363 (plug top) at one end an a red 16A BS60306 socket at the other end.

The adaptor is for earth continuity, insulation resistance and substitute leakage tests.

I have read that all the 3 live terminals on the BS60306 should be connected together so that when an appliance is connected to the adaptor and test equipment all there is a continuous circuit between neutral and live (when the appliance switch is on). I have read the Code of Practice and it seems to suggest this.

Just thought I would have a go at making one rather than buying one.

What advice do people have?

Regards

Kev


Top
 Profile  
 
PostPosted: Fri Mar 09, 2012 9:20 pm 
Offline

Joined: Thu Nov 27, 2008 1:58 pm
Posts: 84
Location: Plymouth
Hi Kev,
If you've already got the plugs then go for it. When I got mine I found that it cost very little extra to buy made up leads off ebay. The plugs\sockets are about £10-£15 each plus cable and 3pin plug.
You're right about joining the phases together in the plug.
If your tester doesn't perform a polarity check first then connect the live and neutral together.
This will prevent someone trying to power a 3 phase appliance via a 3 pin 240v single phase supply :roll:
You are aware that there are different types of 3 phase plugs?


Top
 Profile  
 
PostPosted: Thu Mar 22, 2012 5:21 pm 
Offline

Joined: Fri Jan 13, 2012 1:36 pm
Posts: 4
There is a good thread here http://bit.ly/GHnsoh about the same subject and one post which advises the correct wiring for 3 phase adaptors. I can confirm the adaptors bought from Seaward are wired in exactly the same way.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group